cisco workbook directory

News about cisco workbook

If I Were The Blog Catalog Administrator……

Fri, 18 Apr 2008 21:45:34 +0000
Since long, I have been watching the steep hike in the membership of senior citizens at B.C compared to the increase of the fresh, new and exuberant younger lot. The seniors are, of course there to look up to but I think I’ve got a bit too tired of them now! The “oldies” as I ...]

Group Encrypted Transport VPN

Sun, 13 Apr 2008 14:17:21 +0000
A GETVPN a Cisco új VPN technológiája,mely sok újdonsággal rendelkezik. Az előnyök az alábbi ábrán láthatóak:
További információk: http://www.cisco.com/go/getvpn
Flash video: itt

 

MQC-based Frame Relay Traffic Shaping

Thu, 24 Jan 2008 21:00:22 +0000
This is a “modern” way to configure FRTS, using MQC commands only to accomplish the task. With MQC approach, an unified interface has been introduced to configure all QoS settings, irrelevant of underlying technology.
In summary:
- Legacy command frame-relay traffic-shaping is incompatible with MQC-based FRTS (you can’t mix them)
- Fancy queueing could not be used as ...]


countdown from 3!

Three more days folks, three more days to my next CCIE R&S lab attempt.

What had I prepared so far? DocCD, some 'basic' scenarios for technologies, DocCD, some workbook scenarios and ...
DocCD.

Why on earth did I have more DocCD as part of my preparation this time? Because that was what I missed last
attempt. I have had several 'cramming' scenario sessions with lack of DocCD attempt to find the solutions. Honestly,
quite a lot of answers tips and guides are available from DocCD.

I just took one attempt and I don't think this is good 'expertise' information on the lab preparation. However,
from various sessions doing some readings either from discussion groups, VoD, etc on exam preparation, a lot of them
keep mentioning the DocCD.

In my last attempt, I tried my best not to open DocCD at all! Why is that??? It would be better to have no DocCD
and knowing from the router's straight away. I was totally wrong! DocCD has been provided purposely for assisting the
configuration tasks. But, it would be nice to access DocCD for anything other than 'ordinary' tasks. Say: VLANs, VTP
config, frame relay, OSPF, BGP, multicast, etc. that is the 'basic' configuration. A slightly more 'advanced'
configuration might also be able to be configuread without looking at DocCD. Anything beyond than that point, only
experienced would be able to provide the answer without looking at the DocCD (and I really mean experienced people).
As for me, those 'more advanced' configuration are not always happenign in my experience. However, I am confident I
could always find it in the DocCD. That is the purpose of the DocCD anyway :)

We'll see what would happen in this next round of attempt. From the last attempt and the evaluation afterwards, I
am just confident I could 'smell' my number already ;)

Gatekeeper - Viazone behaviour

Sun, 10 Sep 2006 18:58:16 +0000
How to trigger via zone behaviour?
Local zones - always enable outvia on the destination zone
Remote zones - use invia or outvia on the remote zone
Via-zone gatekeepers differ from legacy gatekeepers in how LRQ and ARQ messages are used for call routing. Using via-zone gatekeepers will maintain normal clusters and functionality. Legacy gatekeepers examine incoming LRQs ...]

All this matter was written with passion, which led to the speedy completion of this writing on cisco workbook. Let this passion burn for some time.
#




ccie cbt
ccie ccnp

Understanding ccie passing score

News about ccie passing score

CCIE Lab Bootcamp and IE Mock Lab

Wed, 16 Jan 2008 22:22:42 +0000
I have scheduled a mock lab from InternetworkExpert for May. Its quite a way off, but this is about

Pingback from connection.netcordia.com/.../ccie-test-and-numbering.aspx

ip igmp snooping for 224.0.0.0 to 224.0.0.255

Wed, 23 Apr 2008 10:32:38 +0000
I have read about this subnet range, it`s not possible to disable the snooping feature on a switch. So routing protocols (like OSPF or EIGRP) are always forwarded to other ports regardless the snooping feature. Is that true? Someone with more informations on that.
——————————————————
In general, addresses from 224.0.0.1 to 224.0.0.255 are reserved and used by ...]

Understanding Traceroute

Sat, 29 Dec 2007 03:24:15 +0000
First off we need to understand that traceroute is a technique to have the routers between the source and destination reveal themselves and finally have the destination reveal itself. Traceroute can be implemented using ICMP, UDP, and even TCP so as a CCIE when someone asks you to filter “traceroute” you should get a ...]


IEWB Vol.3 Update

Tue, 08 Apr 2008 11:00:33 +0000
I completed InternetworkExpert.com version 4.1 volume 3 labs 3 + 4 on Saturday. The IEWB volume 3 labs are supposed to make you faster at core tasks. These labs are what I consider “half-labs”. They cover PPP, frame, ethernet switching, RIP, OSPF, EIGRP, BGP, and redistribution. So far, so good. ...]

Occasionally, someone will tell me that they met a CCIE who has a number lower than either Stuart's or mine and I just laugh. There's a Cisco web page where you can check the status of CCIEs. You have to know their CCIE registration name. It is a good thing to check when interviewing CCIEs.

Was this article worth the search you took in finding information on ccie passing score? We sure hope it is because we wrote this article with the intention of providing information on it.



bgp ccie
bgp ccie
boot camp
boot camp
ccie lab study

A Short ccie lab hardware Summary

News about ccie lab hardware

What is the difference between async modes dedicated and interactive?

Wed, 26 Dec 2007 21:26:58 +0000
“async mode dedicated” is strictly for PPP and SLIP connections. “async mode interactive”, on the other hand, can be used for PPP, SLIP, ARAP, along with EXEC access to the router. Suppose you’re dialing into the router’s AUX port to access the CLI. In this case you want interactive mode. If ...]


We Have At Least Two Things In Common

Mon, 14 Apr 2008 16:39:09 +0000
We have at least one think in common: We are all writers! We write for different reasons. We write in different genres. We write for different readers, but we all write. We write for work, for school, for family, for friends, for community. We write to persuade, to inform, to comment, to motivate, to inspire, ...]

Narbik’s Bootcamp Round 2 Comments

Wed, 19 Mar 2008 16:25:09 +0000
Coming back for a second round of bootcamp with Narbik Kocharians has definitely been worth it. Hearing his lectures a second time has been good reinforcement, plus he’s mixed up the lectures a bit. They’ve been largely the same, but some things have been phrased differently or illustrated differently from what I remember ...]

This article on ccie lab hardware is supposed to be very useful to one seeking more information on ccie lab hardware. Do you think so?
#




ccie routing & switching lab
ccie routing & switching lab workbook
ccie routing and switching
ccie routing and switching lab
ccie lab locations | ccie lab notes | ccie lab pdf